D-Link DXS-3400 User Manual - Page 122

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Clone Unit From Port ~ To Port Description Select this option to enable the clone feature. Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 5-17VLAN Interface (Hybrid) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VLAN Precedence Native VLAN VID Action Add Mode Allowed VLAN Range Clone Unit From Port ~ To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, Dot1q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk Secondary. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select to enable or disable the ingress checking function. Select the VLAN precedence option here. Options to choose from are Mac-based VLAN and Subnet-based VLAN. Tick this option to enable the native VLAN function. After ticking the Native VLAN option the following parameter will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select the action that will be taken here. Options to choose from are Add, Remove, Tagged, and Untagged. Select whether to add an Untagged or Tagged parameters. Enter the allowed VLAN range information here. Select this option to enable the clone feature. Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. 112