D-Link DXS-3400 User Manual - Page 222

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 6-21IPv4 Static Route BFD Window The fields that can be configured are described below: Parameter Interface Name IP Address Description Enter the name of the interface that will be used to create the BFD session here. This name can be up to 12 characters long. Enter the IP address of the BFD peer here. Click the Apply button to accept the changes made. Click the Deletebutton to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv4 Route Table This window is used to display and configure the IPv4 route table settings. To view the following window, click L3 Features> IPv4 Route Table, as shown below: Figure 6-22IPv4 Route Table Window The fields that can be configured are described below: Parameter Show All IP Address Network Address RIP Connected Hardware Description Select to display all IPv4 route information. Select and enter the single IPv4 address here. Select and enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask. Select this option to display only RIP routes. Select this option to display only connected routes. Select this option to display only hardware routes. Hardware routes are routes that have been written into the hardware chip. 212