D-Link DXS-3400 User Manual - Page 250

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Output DSCP List Description Enter the output DSCP list value here. This value must be between 0 and 63. Click the Apply button to accept the changes made. Click the Deletebutton to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Port Trust State and Mutation Binding This window is used to display and configure port trust state and mutation binding settings. To view the following window, click QoS> Advanced Settings > Port Trust State and Mutation Binding, as shown below: Figure 7-8Port Trust State and Mutation Binding Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Trust State DSCP Mutation Map Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the port trust state option here. Options to choose from are CoS and DSCP. Select and enter the DSCP mutation map name used here. This name can be up to 32 characters long. Select the None option to not allocate a DSCP mutation map to the port(s). Click the Apply button to accept the changes made. DSCP CoS Mapping This window is used to display and configure the DSCP CoS mapping settings. To view the following window, click QoS> Advanced Settings > DSCP CoS Mapping, as shown below: 240