D-Link DXS-3400 User Manual - Page 40
Login Method, Password Recovery State, Apply, Management>Login Method, Enable Password, Level
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 4-6Password Recovery Window The fields that can be configured are described below: Parameter Password Recovery State Description Select to enable or disable the password recovery feature here. Enabling this feature allows access to the reset configuration mode in the CLI. From the reset configuration mode, in the CLI, user accounts can be updated, the enable password feature can be updated for administrator privilege levels, and the AAA feature can be disabled to allow local authentication. The running configuration can then be saved as the startup configuration. A reboot is required. Also from the reset configuration mode, in the CLI, a factory reset can be performed if needed by clearing the startup configuration. Click the Apply button to accept the changes made. Login Method This window is used to display and configure the login method for each management interface that this Switch supports. To view the following window, click Management>Login Method, as shown below: Figure 4-7Login Method Window The fields that can be configured in Enable Passwordare described below: Parameter Level Password Type Description Select the privilege level for the user here. The range is from 1 to 15. Select the password type for the user here. Options to choose from are: • Plain Text - Specifies that the password will be in the plain-text form. This is 30