D-Link DXS-3400 User Manual - Page 83

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 4-63NTP Global Settings Window The fields that can be configured in NTP Stateare described below: Parameter NTP State Description Select to globally enable or disable the NTP feature here. Click the Apply button to accept the changes made. The fields that can be configured in NTP Authentication Stateare described below: Parameter NTP Authentication State Description Select to enable or disable the NTP authentication state here. When this feature is enabled, networking nodes will not synchronize with the Switch unless it carries one of the authentication keys. Click the Apply button to accept the changes made. The fields that can be configured in NTP Update Calendarare described below: Parameter NTP Update Calendar Description Select to enable or disable the NTP update calendar feature here. This is used to periodically update the hardware clock from an NTP source. Click the Apply button to accept the changes made. The fields that can be configured in NTP Settingsare described below: Parameter NTP Master Stratum NTP Max Associations Description Enter the NTP master stratum value here. This is used to configure RTC as an NTP master clock when an external NTP is not available. The range is from 1 to 15. Select the Default option to use the default value. Enter the NTP maximum association value here. This is used to configure the maximum number of NTP peers and clients on the Switch. The range is from 1 to 64. Click the Apply button to accept the changes made. 73