D-Link DXS-3400 User Manual - Page 431
sFlow Poller Settings, From Port ~ To Port, Instance, Receiver, Inbound, Outbound, Sampling Rate
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 11-20sFlow Sampler Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Instance Receiver Mode Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the instance's index number if multiple samplers are associated with one interface. The valid range is from 1 to 65535. Enter the receiver's index for this sampler. If not specified, the value is 0. This value must be between 1 and 4. Select the mode here. Options to choose from are Inbound and Outbound. • Selecting Inbound specifies to sample ingress packets. This is the default direction of a sampler. • Selecting Outboundspecifies to sample egress packets. Sampling Rate Max Header Size Enter packet sampling rate here. This value must be between 0 and 65536. Entering 0 will disable this function. If not specified, the default value is 0. Enter the maximum number of bytes that should be copied from sampled packets. This value must be between 18 and 256 bytes. By default, this value is 128 bytes. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. sFlow Poller Settings This window is used to display and configure the sFlow poller settings. To view the following window, click Monitoring>sFlow>sFlow Poller Settings, as shown below: Figure 11-21sFlow Poller Settings Window 421