D-Link DXS-3400 User Manual - Page 269

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 7-29ETS Port Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port ETS Willing Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select to enable or disable the ETS willing mode for DCBX on the specified port(s). This indicates that the interface is willing to accept configurations from the remote Switch. DCBX is used by DCB devices to exchange configuration information with directly connected peers. The protocol may also be used for misconfiguration detection and for configuration of the peer. The willing mode indicates that the local port has been administratively configured to accept configurations from the remote device. Click the Apply button to accept the changes made. Click the Admin Info button to view ETS administrative information associated with the port. Click the Operational Info button to view ETS operational information associated with the port. After clicking the Admin Info button, the following page will appear. Figure 7-30ETS Port Settings (Admin Info) Window 259