D-Link DXS-3400 User Manual - Page 202
LLDP Dot3 TLVs Settings, L2 Features>LLDP>LLDP Dot3 TLVs Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Unit From Port ~ To Port Port VLAN Protocol VLAN VLAN Name Protocol Identity Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. Select this option to enable or disable Port and Protocol VLAN ID (PPVID) TLV to send, and enter the VLAN ID in PPVID TLV. Select this option to enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN name TLV. Select this option to enable or disable the Protocol Identity TLV to send, and the protocol name. Options for protocol name to choose from are None, EAPOL, LACP, GVRP, STP, and All. Click the Apply button to accept the changes made. LLDP Dot3 TLVs Settings This window is used to display and configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements. To view the following window, click L2 Features>LLDP>LLDP Dot3 TLVs Settings, as shown below: Figure 5-104LLDP Dot3 TLVs Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port MAC/PHY Configuration/Status Link Aggregation Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the MAC/PHY Configuration/Status TLV to send. The MAC/PHY Configuration/Status TLV is an optional TLV that identifies (1) the duplex and bit-rate capability of the sending IEEE 802.3 LAN node, and (2) the current duplex and bit-rate settings of the sending IEEE 802.3 LAN node. Select this option to enable or disable the Link Aggregation TLV to send. The Link Aggregation TLV indicates contains the following information. Whether the link is capable of being aggregated, whether the link is currently in an aggregation, and the aggregated port channel ID of the port. If the port is not aggregated, then the ID is 0. 192