D-Link DXS-3400 User Manual - Page 55

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 4-24Telnet/Web Window The fields that can be configured in Telnet Settingsare described below: Parameter Telnet State Port Description Select this option to enable or disable the configuration through Telnet. Enter the TCP port number used for Telnet management of the Switch. The "wellknown" TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. The fields that can be configured in Source Interfaceare described below: Parameter Source Interface State Type VID Description Select to enable or disable the source interface's state here. Select the type of source interface that will be used here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface's ID here. For loopback interfaces the range is from 1 to 8. For the management (Mgmt) interface this value can only be 0. For VLAN interfaces the range is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in Web Settingsare described below: Parameter Web State Port Description Select this option to enable or disable the configuration through the web. Enter the TCP port number used for Telnet management of the Switch. The "wellknown" TCP port for the Telnet protocol is 80. Click the Apply button to accept the changes made. Session Timeout This window is used to display and configure the session timeout settings. To view the following window, click Management>Session Timeout, as shown below: 45