D-Link DXS-3400 User Manual - Page 446

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 13-15Configuration Backup to TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the TFTP server's IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the running-config option to backup the running configuration file from the Switch. Select the startupconfig option to backup the start-up configuration file from the Switch. Enter the destination path and location where the configuration file should be stored on the TFTP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. Configuration Backup to FTP This window is used to initiate a configuration file backup to an FTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to FTP, as shown below: Figure 13-16Configuration Backup to FTP Window The fields that can be configured are described below: Parameter Unit FTP Server IP TCP Port Description Select the Switch unit that will be used for this configuration here. Enter the FTP server's IP address here. When select the IPv4 option, enter the IPv4 address of the FTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the FTP server in the space provided. Enter the TCP port number used for the FTP connection here. The range is from 436