D-Link DXS-3400 User Manual - Page 175
IGMP Snooping Groups Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Unit From Port ~ To Port Authentication Accounting Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select to enable or disable authentication here. This is used to enable or disable the authentication function for IGMP join messages. When enabled and the client wants to join a group, the system will perform authentication first. Select to enable or disable accounting here. This is used to enable or disable accounting when a listener joining an IGMP group. When enabled and the client joins a group, the accounting message will be sent to RADIUS. Click the Apply button to accept the changes made. The fields that can be configured in IGMP Snooping AAA Tableare described below: Parameter Unit From Port ~ To Port Description Select the Switch unit that will be used for this display here. Select the range of ports that will be used for this display here. Click the Find button to generate the display based on the selections made. Click the Show All button to display all the available entries. IGMP Snooping Groups Settings This window is used to display and configure and view the IGMP snooping static group, and view IGMP snooping group. To view the following window, click L2 Features>L2 Multicast Control> IGMP Snooping >IGMP Snooping Groups Settings, as shown below: Figure 5-79IGMP Snooping Groups Settings Window The fields that can be configured in IGMP Snooping Static Groups Settingsare described below: Parameter VID Group Address Description Enter a VLAN ID of the multicast group. The range is from 1 to 4094. Enter an IP multicast group address. 165