D-Link DXS-3400 User Manual - Page 127

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 5-23VLAN Interface (Trunk Secondary) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Native VLAN VID Action Allowed VLAN Range Clone Unit From Port ~ To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, Dot1q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk Secondary. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. After selecting Trunk Secondary as the VLANMode the following parameter will be available. Select to enable or disable the ingress checking function. Tick this option to enable the native VLAN function. Also select if this VLAN supports Untagged or Tagged frames. After ticking the Native VLAN option the following parameter will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select the action that will be taken here. Options to choose from are All, Add,Remove, Except, and Replace. Enter the allowed VLAN range information here. Select this option to enable the clone feature. Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. After selecting the Port Summary tab option, at the top of the page, the following page will be available. 117