D-Link DXS-3400 User Manual - Page 399

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following page will appear. Figure 10-13CFM Port Settings (View Detail) Window Click the Back button to return to the previous window. CFM Loopback Test This window is used to display and configure the CFM loopback test settings. To view the following window, click OAM > CFM >CFM Loopback Test, as shown below: Figure 10-14CFM Loopback Test Window The fields that can be configured are described below: Parameter MAC Address Remote MEPID MEPID MA Name Domain Name LBMs Number LBM Payload Length LBM Payload Pattern Description Select and enter the destination MAC address here. Select and enter the remote MEP's ID here. The range is from 1 to 8191. Enter the MEP's ID that will initiate the loopback test here. The range is from 1 to 8191. Enter the MA's name here. This name can be up to 22 characters long. Enter the MD's name here. This name can be up to 22 characters long. Enter the number of LBMs to be sent here. The range is from 1 to 65535. By default, this value is 4. Select and enter the payload length of the LBM to be sent here. The range is from 0 to1500. By default, this value is 0. Select and enter the LBM payload pattern here. This specifies an arbitrary amount of data to be included in a Data TLV, along with an indication whether the Data TLV is to be included. This string can be up to 1500 characters long. No spacesare allowed. 389