D-Link DXS-3400 User Manual - Page 82

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Name Server IPv4 Name Server IPv6 Description Select and enter the IPv4 address of the DNS server. Select and enter the IPv6 address of the DNS server. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. DNS Host Settings This window is used to display and configure the static mapping entry for the host name and the IP address in the host table. To view the following window, click Management>DNS >DNS Host Settings, as shown below: Figure 4-62DNS Host Settings Window The fields that can be configured are described below: Parameter Host Name IP Address IPv6 Address Description Enter the host name of the equipment. Select and enter the IPv4 address of the equipment. Select and enter the IPv6 address of the equipment. Click the Apply button to accept the changes made. Click the Clear All button to clear the information entered in all the fields on this page. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. NTP NTP Global Settings This window is used to display and configure the global Network Time Protocol (NTP) settings. To view the following window, click Management>NTP > NTP Global Settings, as shown below: 72