D-Link DXS-3400 User Manual - Page 270
ETS Recommend Settings, QoS> ETS > ETS Recommended Settings, From Port ~ To Port
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide ETS Recommend Settings This window is used to display and configure the ETS recommended settings on the specified interface. These settings will be translated to a DCBX ETS recommendation TLV. The TLV is encoded into each LLDP message and may be transmitted by a system in order to indicate a recommendation on how ETS should be configured. To view the following window, click QoS> ETS > ETS Recommended Settings, as shown below: Figure 7-31ETS Recommend Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Queue 1 ~ Queue 7 Queue ID CoS Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select and enter the recommended bandwidth for traffic classes 0 to 7 here that will be associated with the selected port(s). It is required to specify 8 values for traffic class 0 to 7 respectively. The sum of the bandwidth assigned to a given port is required at all times to be equal to 100. An operation that attempts to change the bandwidth where the sum is not 100 will be rejected. The range is from 0 to 100 percent. The value of zero stands for strict priority mode. Select the None option to disable this feature on the specified port(s). Select the queue ID (traffic class ID) that will be associated with the port(s) here. The range is from 0 to 7. Enter the CoS value that will be associated with the selected port(s) here. The range is from 0 to 7. Select the None option to disable this feature on the specified port(s) Click the Apply button to accept the changes made. 260