D-Link DXS-3400 User Manual - Page 59

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter DHCP Ping Packet DHCP Ping Timeout Description Enter the number of ping packets that the Switch will send out on the network containing the IP address to be allotted. If the ping request is not returned, the IP address is considered unique to the local network and then allotted to the requesting client. 0 means there is no ping test. The range is from 0 to 10. The default value is 2. Enter the amount of time the DHCP server must waits before timing out a ping packet. The range is from 100 to 10000 milliseconds. The default value is 100 milliseconds. Click the Apply button to accept the changes made. DHCP Server Pool Settings This window is used to display and configure the DHCP server pool settings. To view the following window, click Management>DHCP > DHCP Server >DHCP Server Pool Settings, as shown below: Figure 4-30DHCP Server Pool Settings Window The fields that can be configured are described below: Parameter Pool Name Description Enter the DHCP server's pool name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Edit Class button to configure the DHCP class. Click the Edit Option button to configure the DHCP server pool's option settings. Click the Configure button to configure the DHCP server pool's settings. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit Class button, the following page will appear. 49