D-Link DXS-3400 User Manual - Page 259

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Set Action button to configure the set action settings for the specified entry. Click the Policer button to configure the policer settings for the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Set Action button, the following page will appear. Figure 7-17Policy Map (Set Action) Window The fields that can be configured are described below: Parameter None Specify New Precedence New DSCP New CoS New Cos Queue Description Select this option to specify that no action will be taken. Select this option to specify that action will be taken based on the configurations made. Select the new precedence value for the packet here. The range is from 0 to 7. Select the IPv4 only option to specify that IPv4 precedence will be marked only. If not selected, then both IPv4 and IPv6 precedence will be marked. For IPv6 packets, the precedence is the most three significant bits of the traffic class of the IPv6 header. Setting the precedence will not affect the CoS queue selection. Select the new DSCP value for the packet here. The range is from 0 to 63. Select the IPv4 only option to specify that the IPv4 DSCP will be marked only. If not selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the DSCP will not affect the CoS queue selection. Select the new CoS value to the packet here. The range is from 0 to 7. Setting the CoS will not affect the CoS queue selection. Select the new CoS queue value to the packets here. This will overwrite the original CoS queue selection. Setting the CoS queue will not take effect if the policy map is applied for the egress flow on the interface. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. After clicking the Policer button, the following page will appear. 249