D-Link DXS-3400 User Manual - Page 273

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description • Disable - Specifies that the congestion notification capability is administratively disabled for this priority. • Interior - Specifies that the priority parameter of the frame input is not remapped to or from this priority and the frames are transmitted without a CN-TAG. • Interior-ready - Specifies that the priority parameter of the frame input is not remapped to or from this priority and the CN-TAGs won't be stripped when transmitting the frames. • Edge - Specifies that the priority parameter of the frame input at this priority is remapped to an alternate value. Frames at other priorities are not remapped to this priority and the frames are transmitted without a CN-TAG. Alternate Priority CP Creation Select the alternate priority value here. This specifies a priority value to which this priority value is to be remapped when the receiving frame with an802.1p priority equal to the specified CNPV at Edge port. The range is from 0 to 7. Select to enable or disable the CP creation feature here. Click the Apply button to accept the changes made. QCN CNPV Interface Settings This window is used to display and configure the QCN CNPV interface settings. To view the following window, click QoS> QCN >QCN CNPV Interface Settings, as shown below: Figure 7-35QCN CNPV Interface Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port CNPV Defense Mode Choice Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select the CNPV value that will be used on the specified port(s) here. The range is from 0 to 7. Select the defense mode choice that will be used on the specified port(s) here. Options to choose from are Admin, Auto, and Comp. • Admin - Specifies that the default CND defense mode and alternate priority are specified by administrator. 263