D-Link DXS-3400 User Manual - Page 177
IGMP Snooping Rate Limit Settings, From Port ~ To Port, Limit Number, No Limit, Action, Apply
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 5-80IGMP Snooping Filter Settings Window The fields that can be configured in IGMP Snooping Rate Limit Settingsare described below: Parameter Unit From Port ~ To Port Limit Number Action VID Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. This is only available if the Port option was selected as the action below. Enter the limit number here. This is to configure the rate of IGMP control packets that the Switch can process on a specific interface. The range is from 1 to 1000 packets per second. Select the No Limit option to remove the limitation. Select the action that will be taken here. Options to choose from are Port and VLAN. Enter the VLAN's ID here. This is the Layer 2 VLAN on a trunk port and applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This is only available if the VLAN option was selected as the action. Click the Apply button to accept the changes made. The fields that can be configured in IGMP Snooping Limit Settingsare described below: Parameter Unit From Port ~ To Port Limit Number Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the limit number here. This is used to set the limitation on the number of 167