D-Link DXS-3400 User Manual - Page 233
Control Packet CPU Filtering
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Control Packet CPU Filtering This window is used to display and configure the IPMC control packet CPU filtering settings. To view the following window, click L3 Features> IP Multicast Routing Protocol > IPMC >Control Packet CPU Filtering, as shown below: Figure 6-37Control Packet CPU Filtering Window The fields that can be configured in Control Packet CPU Filtering Settingsare described below: Parameter Unit From Port ~ To Port Packet Type Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the packet type here. Options to choose from are: • DVMRP - Specifies that the CPU will discard Distance Vector Multicast Routing Protocol (DVMRP) Layer 3 control packets sent to it. • PIM - Specifies that the CPU will discard Protocol Independent Multicast (PIM) Layer 3 control packets sent to it. • IGMP Query - Specifies that the CPU will discard Internet Group Management Protocol (IGMP) Query Layer 3 control packets sent to it. • OSPF - Specifies that the CPU will discard Open Shortest Path First (OSPF) Layer 3 control packets sent to it. • RIP - Specifies that the CPU will discard Routing Information Protocol (RIP) Layer 3 control packets sent to it. • VRRP - Specifies that the CPU will discard Virtual Router Redundancy Protocol (VRRP) Layer 3 control packets sent to it. Action Select the action that will be taken here. Options to choose from are: • Add - Specifies to add a new entry based on the information entered. • Delete - Specifies to delete an entry based on the information entered. Click the Apply button to accept the changes made. The fields that can be configured in Control Packet CPU Filtering Settingsare described below: Parameter Unit From Port ~ To Port Description Select the Switch unit that will be used for this display here. Select the range of ports that will be used for this display here. Click the Find button to find and display entries based on the selections made. 223