D-Link DXS-3400 User Manual - Page 192
Multicast VLAN Group Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description the multicast VLAN. Priority Select the priority value here. The range is from 0 to 7. A lower value represents a higher priority. Click the Apply button to accept the changes made. The fields that can be configured in Replace Source IP Settingsare described below: Parameter VID Action Address Type Description Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the address type here. Options to choose from are IPv4 and IPv6. • IPv4 - Specifies to enter the source IPv4 address for IGMP control packet reporting up to routers. • IPv6 - Specifies to enter the source IPv6 address for MLD control packet reporting up to routers. IP Address From Enter the IPv4/IPv6 address here. Select the "from" option here. Options to choose from are Receiver, Source, and Both. • Receiver - Specifies that the source IPv4/IPv6 address of the IGMP/MLD report/leave packet received on any multicast VLAN receiver port will be replaced. • Source - Specifies that the source IPv4/IPv6 address of the IGMP/MLD report/leave packet received on any multicast VLAN source port will be replaced. • Both - Specifies that the source IPv4/IPv6 address of the IGMP/MLD report/leave packet received on any port in the multicast VLAN will be replaced. Click the Apply button to accept the changes made. The fields that can be configured in Multicast VLAN Tableare described below: Parameter VID Description Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094. Click the Findbutton to locate a specific entry based on the information entered. Click the Show All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Multicast VLAN Group Settings This widow is used to view and configure the multicast VLAN's group settings. To view the following window, click L2 Features>L2 Multicast Control> Multicast VLAN >Multicast VLAN Group Settings, as shown below: 182