D-Link DXS-3400 User Manual - Page 311

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Trap State Description Click to enable or disable port security traps on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in Port Security Trap Rate Settingsare described below: Parameter Trap Rate Description Enter the number of traps per second. The range is from 0 to 1000. The default value 0 indicates an SNMP trap to be generated for every security violation. Click the Apply button to accept the changes made. The fields that can be configured in Port Security System Settingsare described below: Parameter System Maximum Address Description Enter the maximum number of secure MAC addresses allowed. If not specified, the default value is No Limit. The valid range is from 1 to 12288. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Port Security VLAN Settingsare described below: Parameter VID List VLAN Max Learning Address Description Enter the VLAN ID(s) here. Enter the maximum number of allowed MAC addresses that can be learned on the specified VLAN(s) here. The range is from 1 to 12288. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Find VLANare described below: Parameter VID Description Enter the VLAN ID that will be located here. Click the Find button to locate a specific entry based on the information entered. Port Security Port Settings This window is used to display and configure the port security port settings. To view the following window, click Security > Port Security >Port Security Port Settings, as shown below: 301