D-Link DXS-3400 User Manual - Page 134

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter MAC Address VID Priority Description Enter the unicast MAC address. Enter the VLAN ID that will be used. Select the priority that is assigned to untagged packets. This value is between 0 and 7. Click the Apply button to accept the changes made. Click the Deletebutton to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. L2VLAN Interface Description This window is used to display and configure the Layer 2 VLAN interface description. To view the following window, click L2 Features>VLAN>L2VLAN Interface Description, as shown below: Figure 5-34L2VLAN Interface Description Window The fields that can be configured are described below: Parameter L2VLAN Interface Description Description Enter the ID of the Layer 2 VLAN interface here. Enter the description for the Layer 2 VLAN interface here. Click the Apply button to accept the changes made. Click the Find button to generate the display based on the information entered. Click the Show All button to display all the available entries. Click the Delete Description button to remove the description from the specified Layer 2 VLAN. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Subnet VLAN This window is used to display and configure the subnet VLAN settings. A subnet VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on a port, its source IP address will be used to match the subnet VLAN entries. If the source IP is in the subnet of an entry, the packet will be classified to the VLAN defined for this subnet. To view the following window, click L2 Features>VLAN> Subnet VLAN, as shown below: 124