D-Link DXS-3400 User Manual - Page 29
System Log, System Attack Log, System>System Log>System Attack Log
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Host IPv4 Address Host IPv6 Address UDP Port Severity Facility Discriminator Name Description Enter the system log server's IPv4 address here. Enter the system log server's IPv6 address here. Enter the system log server's UDP port number here. This value must be either 514 or between 1024 and 65535. By default, this value is 514. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Select the facility value here. Options to choose from are 0 to 23. Enter the discriminator name here. This name can be up to 15 characters long. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. System Log This window is used to display and clear the system log. To view the following window, click System>System Log>System Log, as shown below: Figure 3-14System Log Window Click the Clear Log button to clear the system log entries displayed in the table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. System Attack Log This window is used to display and clear the system attack log. To view the following window, click System>System Log>System Attack Log, as shown below: 19