D-Link DXS-3400 User Manual - Page 147

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 5-49VLAN Mapping Profile (Ethernet, Add Rule) Window The fields that can be configured are described below: Parameter Rule ID Src-MAC Address Dst-MAC Address Priority Inner VID Ethernet Type Action Description Enter the VLAN mapping rule's ID here. If not specified, the rule ID begins from 10 and is incrementedby 10 for every new rule. The range is from 1 to 10000 Enter the source MAC address here. Enter the destination MAC address here. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. Enter the inner VLAN's ID here. The range is from 1 to 4094. Enter the Ethernet type value here. The range is from 0x0 to 0xFFFF. Select the action that will be taken here. Options to choose from are Dot1qTunnel and Translate. • Dot1q-Tunnel - Specifies that the outer-VID will be added for matched packets. • Translate - Specifies that the outer-VID will replace the outer-VID of the matched packets. New Outer VID 802.1P Priority New Inner VID Enter the new outer VLAN's ID here. The range is from 1 to 4094. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. After selecting Dot1q-Tunnel as the action, enter the new inner VLAN's ID here. The range is from 1 to 4094. This option is only available when Dot1q-Tunnel was selected as the action. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. After clicking the Add Rule button next to an IP type profile, the following page will appear. 137