D-Link DXS-3400 User Manual - Page 174
IGMP Snooping AAA Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Fast Leave Report Suppression Suppression Time Querier State Query Version Query Interval Max Response Time Robustness Value Las Member Query Interval Proxy Reporting Source Address Rate Limit Ignore Topology Change Description Select this option to enable or disablethe IGMP snooping fastleave function.If enabled, the membership is immediately removed when the system receive the IGMP leave message. Select this option to enable or disable the report suppression. The report suppression function only works for IGMPv1 and IGMPv2 traffic. When report suppression is enabled, the Switch suppresses the duplicate reports sent by hosts. The suppression for the same group report or leave will continue until the suppression time expired. For report or leave messages to the same group, only one report or leave message is forwarded. The remaining report and leave messages are suppressed. Enter the interval of suppressing duplicate IGMP reports or leaves. The range is from 1 to 300. Select this option to enable or disable the querier state. Select the general query packet version sent by the IGMP snooping querier. Options to choose from are 1, 2, and 3. Enter the interval at which the IGMP snooping querier sends IGMP general query messages periodically. The range is from 1 to 31744. Enter the maximum response time, in seconds, advertised in IGMP snooping queries. The range is from 1 to 25. Enter the robustness variable used in IGMP snooping. The range is from 1 to 7. Enter the interval at which the IGMP snooping querier sends IGMP group-specific or group-source-specific (channel) query messages. The range is from 1 to 25. Select this option to enable or disablethe proxy-reporting function. Enter the source IP of proxy reporting. This is available when Enabled is selected in Proxy Reporting. Enter the rate limit value here. The range is from 1 to 1000. Tick the No Limit option to apply no rate limit on this profile. Select to enable or disable the ignore topology change feature here. Click the Apply button to accept the changes made. IGMP Snooping AAA Settings This window is used to display and configure the IGMP snooping AAA settings. To view the following window, click L2 Features>L2 Multicast Control> IGMP Snooping >IGMP Snooping AAA Settings, as shown below: Figure 5-78IGMP Snooping AAA Settings Window The fields that can be configured in IGMP Snooping AAA Settingsare described below: 164