D-Link DXS-3400 User Manual - Page 354

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 9-61IPv6 DHCP Guard (Please Select) Window Select the radio button next to the entry to use that ACL in the configuration. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the OK button to accept the selection made. IPv6 Source Guard IPv6 Source Guard Settings This window is used to display and configure the IPv6 source guard settings. To view the following window, click Security > IMPB > IPv6 >IPv6 Source Guard>IPv6 Source Guard Settings, as shown below: Figure 9-62IPv6 Source Guard Settings Window The fields that can be configured are described below: Parameter Policy Name Global Auto-Configure Address Link Local Traffic Target Port Unit From Port ~ To Port Description Enter the policy name here. This name can be up to 32 characters long. Select to permit of deny data traffic from the auto-configured global address. It is useful when all global addresses on a link are assigned by DHCP and the administrator that wants to block hosts with self-configured addresses from sending traffic. Select to permit of deny hardware permitted data traffic send by the link-local address. Tick this option to specify the target port. Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Edit button to re-configure the specific entry. 344