D-Link DXS-3400 User Manual - Page 240
SNMP Server Traps VRRP, Virtual Router Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter SNMP Server Traps VRRP Auth Fail Non-owner-ping Response Description Select to enable or disable the SNMP server traps feature for authentication failures. If enabled, if a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type, then a trap will be sent out. Select to enable or disable the non-owner ping response feature here. This feature is used to enable the virtual router in the master state to respond to ICMP echo requests for an IP address not owned but associated with this virtual router. Click the Apply button to accept the changes made. The fields that can be configured in Virtual Router Settingsare described below: Parameter VLAN VRID Virtual IP Address VRRP Authentication Interface Name VRID Description Enter the VLAN interface's ID used here. The range is from 1 to 4094. Enter the virtual router's ID used here. This ID is used to identify the virtual router in the VRRP group. The range is from 1 to 255. Enter the IPv4 address for the created virtual router group here. Select to enable and then enter the plain text authentication password for VRRP authentication on the interface here. This string can be up to 8 characters long.The authentication is applied to all virtual routers on this interface. The devices in the same VRRP group must have the same authentication password. Enter the interface name used in the display here. This name can be up to 12 characters long. Enter the virtual router ID used in the display here. The range is from 1 to 255. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to modify the specified entry. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit button, the following page will appear. Figure 6-48VRRP Settings (Edit) Window The fields that can be configured are described below: Parameter Advertisement Interval Description Enter the advertisement interval value here. This is the time interval between successive VRRP advertisements by the master router. The range is from 1 to 230