HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - User Guide - Page 237
Insert Memory Card, Fax Send error
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Alert and warning messages (continued) Control panel message Description Recommended action Fax Send error An error occurred while trying to send a fax. Try resending the fax. Try faxing to another fax number. Check for a dial tone on the phone line by pressing START FAX. Check that the telephone cord is securely connected by unplugging and replugging the cord. Make sure that you are using the telephone cord that came with the device. Make sure that the phone is working by disconnecting the device, plugging in a telephone to the phone line, and making a voice call. Connect the device to a different phone line. Set the fax resolution to Standard instead of the default of Fine. See To adjust the resolution for the current fax job. If the error persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box. Fit to Page on flatbed only The copy reduce/enlarge feature (called "Fit to Page") applies only to copies made from the flatbed scanner. Use the flatbed or select another reduction/enlargement setting. Group dial not allowed in group The speed-dial code that you typed is programmed for a group. Adding a group-dial to another group-dial is not allowed. Add one-touch buttons (programmed as an individual speed dial) or speed-dial codes to a group-dial. Insert Memory Card Card is not in memory slot or is not inserted completely. Insert card or verify that card is inserted completely. Invalid date An invalid date was entered, such as June 35. Re-enter the date. Invalid driver You are using the incorrect printer driver. Reselect the printer driver appropriate for your device. Invalid entry Invalid data or response. Correct the entry. Invalid Memory Card The proof sheet does not match the files Remove the memory card and insert the on the memory card. correct memory card. Mem. low 1 copy Press [cancel] The device completed making one copy. Press CANCEL to clear the error. Break The remaining copies have been the job into smaller jobs that contain canceled because of low device-memory. fewer pages. Memory Card is in backwards The memory card was inserted backwards into the card slot. Remove, turn, and reinsert the card. Memory is low Try again later The device does not have enough memory to start a new job. Wait until the current job is finished before starting a new job. ENWW Control panel messages 221