HP 4600 Service Manual - Page 280
Alphabetical printer messages (HP Color LaserJet 4600 models
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
Alphabetical printer messages (HP Color LaserJet 4600 models) NOTE Many of the procedures in this section instruct you to replace the DC controller PCA, the ETB, the formatter, the drum drive motors, the drum drive gears, or a laser/scanner unit. After replacing one of these items, you must access the Print Quality menu and select CALIBRATE NOW to ensure good print quality after the repair. When the ETB or the fuser are replaced before their normal end of life, access the resets menu and reset the counter to zero. See Calibrate Now (HP Color LaserJet 4600 models). Table 7-2 Alphabetical printer messages (HP Color LaserJet 4600 models) Message Description Action Access denied menus locked An attempt has been made to modify a menu item, but the printer administrator has enabled the control-panel security mechanism. The message will disappear shortly, and the printer will return to the Ready state. Contact the printer administrator to change settings. BAD OPTIONAL TRAY CONNECTION The 500-sheet input tray is not making 1 Verify that the printer is on a level a sufficient connection with the printer. surface. 2 Turn the printer off. 3 Reseat the printer on the 500sheet input tray. 4 If the printer is on the optional printer stand, make sure that the support straps are attached to the rear of the stand and the printer. 5 Turn the printer on after reseating the 500-sheet input tray. CHOSEN PERSONALITY NOT AVAILABLE For help press alternates with The PJL encountered a request for a personality that does not exist in the printer. The job is aborted and no pages are printed. 1 Press for detailed information. 2 Press and to step through the instructions. CHOSEN PERSONALITY NOT AVAILABLE To continue press Clearing paper path CLOSE FRONT COVERS For help press The printer jammed or detected misplaced paper when turned on. The printer is attempting to eject jammed pages automatically. The covers have to be closed. No action is necessary. 1 Press for more information. 2 Close the front covers. 264 Chapter 7 Troubleshooting ENWW