HP 4600 Service Manual - Page 326
Storage Write Fail, Printer Error - 68 0 permanent storage write fail
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
Table 7-4 Numerical printer messages (HP Color LaserJet 4600 models) (continued) Message Description Action STORAGE ERROR 1 removable disk (flash or hard) To continue press 68.X PERMANENT STORAGE FULL For help press alternates with 68.X PERMANENT STORAGE FULL To continue A non-volatile storage device is full. Pressing should clear the message. Printing can continue, but unexpected behavior might occur. X Description 0 on board NVRAM 1 removable disk (flash or hard) 1 Press to continue. 2 For 68.0 errors, turn the printer off and then on. 3 If a 68.0 error persists, perform an NVRAM intitialization. 4 For 68.1 errors, use the HP Web Jetadmin software to delete files from the disk drive. 5 If a 68.1 errors persists, reinitialize the hard disk. press 68.X PERMANENT STORAGE WRITE FAIL To continue press 79.XXXX PRINTER ERROR To continue turn off then on A non-volatile storage device is failing to write. Pressing should clear the message. Printing can continue, but unexpected behavior might occur. X Description 0 on board NVRAM 1 removable disk (flash or hard) A critical hardware error has occurred. 1 Press to continue. 2 Turn the printer off and then on. 3 If the problem persists, initialize NVRAM. 4 Reinitialize the hard disk. 1 Turn the printer off and then on. 2 If the problem persists, reseat the firmware DIMM. 3 Reseat the formatter. 4 Replace the firmware DIMM. 5 Replace the formatter. Calibrate the printer. See Calibrate Now (HP Color LaserJet 4600 models). 8X.YYYY EIO ERROR The EIO accessory card in slot X has encountered a critical error. 1 Turn the printer off and then on. 2 If the problem persists, reseat the EIO card. 3 Replace the EIO card. 310 Chapter 7 Troubleshooting ENWW