HP 4600 Service Manual - Page 290

Table 7-2 Alphabetical printer messages (HP Color LaserJet 4600 models) (continued) Message Description Action Ready Diagnostics mode To exit press Cancel Job button Receiving upgrade REINSTALL CARTRIDGE alternates with A firmware upgrade is in progress. The cartridge is not fully seated. For help press Do not turn the printer off until the printer returns to the Ready state. 1 Press for detailed information. 2 Press and to step through the instructions. REMOVE ALL PRINT CARTRIDGES To exit press Cancel Job key REMOVE AT LEAST 1 PRINT CARTRIDGE To exit press Cancel Job key REPLACE CARTRIDGE alternates with For help press The printer is executing a Component test and the Belt only component is selected. Remove all of the print cartridges. The printer is executing a Disable Remove one print cartridge. cartridge check or Component test and Cartridge Motor component is selected. The identified print cartridge has reached its end of life. Printing will not continue until the cartridge is replaced. 1 Replace the identified print cartridge to continue printing. 2 Press for detailed information. 3 Press and to step through the instructions. 4 Supplies-ordering information is also available from the embedded Web server. REPLACE FUSER KIT The fuser kit is at its end of life. 1 Replace the fuser to continue printing. 2 Press for detailed information. 3 Press and to step through the instructions. 4 Supplies-ordering information is also available from the embedded Web server. REPLACE SUPPLIES For status press At least one supply item is out and needs to be replaced and another supply item is either out or low. 1 Press to identify which supplies should be replaced. 2 Replace the identified supplies to continue printing. 274 Chapter 7 Troubleshooting ENWW