HP 4600 Service Manual - Page 298
Incorrect <color> Cartridge, Flash Disk X
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
Table 7-3 Alphabetical printer messages (HP Color LaserJet 4610n and 4650 models) (continued) Message Description Action Event log empty SHOW EVENT LOG was selected on the control-panel, and the event log is empty. No action is necessary. FLASH DEVICE FAILURE To clear press alternates with Ready A device failure has occurred on the specified drive. 1 Printing can continue for jobs that do not require the Flash DIMM. 2 To remove this message from the control-panel display, turn the printer off and then on. 3 If the message persists, remove and reinstall the flash DIMM. 4 If the message persists, replace the flash DIMM. Flash disk X initializing Do not power off FLASH FILE OPERATION FAILED To clear press alternates with The new flash DIMM that is installed in No action is necessary. slot X is initializing. The printer received a PJL file system command that attempted an illogical operation (for example, to download a file to a non-existent directory). 1 Printing can continue. 2 Turn the printer off and then on. 3 If the message reappears, a problem might exist with the software program. Ready FLASH FILE SYSTEM IS FULL To clear press alternates with Ready FLASH IS WRITE PROTECTED To clear press alternates with The printer received a PJL file system command that attempted to store something on the file system. The attempt was unsuccessful because the file system is full. 1 Use HP Web Jetadmin software to delete files from the flash memory and then try again. 2 To remove this message from the control-panel display, turn the printer off and then on. The file system device is protected and 1 To enable writing to the flash no new files can be written to it. memory, turn off write protection, by using HP Web Jetadmin. 2 To remove this message from the control-panel display, turn the printer off and then on. Ready INCORRECT CARTRIDGE An incorrect cartridge is installed in a slot and the cover is closed. alternates with For help press NOTE The supplies gauge shows the print cartridge consumption levels. 1 Press and then press for help. 2 Press and to step through the instructions. 282 Chapter 7 Troubleshooting ENWW