HP 4600 Service Manual - Page 303

Table 7-3 Alphabetical printer messages (HP Color LaserJet 4610n and 4650 models) (continued) Message Description Action alternates with MANUALLY FEED To use another tray press MANUALLY FEED For help press Moving solenoid To exit press Stop key No job to cancel NON HP CARTRIDGE DETECTED NON HP SUPPLY IN USE alternates with Ready OPTIONAL TRAYS NOT SUPPORTED A job requires a specific paper type and size that is not currently available. 1 Press for detailed information. 2 Press and to step through the instructions. The printer is executing a Component Test and Solenoid is the component selected. No action is necessary. The STOP button was pressed, but no active job or buffered data is available to cancel. This message appears for approximately two seconds before the printer returns to the Ready state. No action is necessary. A new cartridge has been installed that is not made by HP. This message appears until an HP cartridge is installed or STOP is pressed. NOTE The supplies gauge shows the print cartridge consumption levels. If you believe the cartridge is an HP cartridge, please call the HP fraud hotline. Any printer repair that is required as a result of using non-HP cartridges is not covered under HP warranty. To continue printing, press STOP. The first pending job will be cancelled. If the job does not print, try resending the job to the printer. The printer has detected that a non-HP print cartridge is currently installed. NOTE The supplies gauge shows the print cartridge consumption levels. If you believe the cartridge is an HP cartridge, please call the HP fraud hotline. CAUTION Any printer repair that is required as a result of using non-HP cartridges is not covered under HP warranty. The printer detects that an optional sheet-feeder is installed. The HP Color LaserJet 4610n printer does not support optional sheet-feeders. Remove any optional trays that might have been installed. ENWW Printer-error troubleshooting 287