HP 4600 Service Manual - Page 296

Table 7-3 Alphabetical printer messages (HP Color LaserJet 4610n and 4650 models) (continued) Message Description Action CHOSEN PERSONALITY NOT AVAILABLE To continue press Clearing event log Clearing paper path CLOSE FRONT COVERS For help press This message appears while the event log is cleared. The printer will exit the menus after the event log has been cleared. No action is necessary. The printer jammed or detected misplaced media when it was turned on. The printer is attempting to eject jammed pages automatically. No action is necessary. The covers have to be closed. 1 Press for more information. 2 Close the front covers. NOTE This message might also appear if the fuser is missing or incorrectly installed. Ensure that the fuser is correctly installed. CPR SENSOR OUT OF RANGE The CPR Sensor is not behaving properly. 1 Force a calibration by selecting Full Calibrate Now on the Print Quality menu. See Full Calibrate Now (HP Color LaserJet 4610n and 4650 models). 2 If the message persists, verify the cables are seated correctly and the connector J1024 is making good contact with the DC controller. 3 Replace the color-registration detection unit. 4 If the message persists, replace the DC controller PCA. Calibrate the printer after replacing the DC controller. See Full Calibrate Now (HP Color LaserJet 4610n and 4650 models). DATA RECEIVED To print last page press Deleting. . . . DETECTABLE SIZE IN TRAY xx For help press The printer received data and is waiting for a form feed. When the printer receives another file, the message should disappear. Press to continue. The printer is currently deleting the stored job. No action is necessary. A tray has been loaded with media that 1 Press for detailed information. is a standard size and the switch in the tray is set to custom. 2 Press and to step through the instructions. 280 Chapter 7 Troubleshooting ENWW