HP 4600 Service Manual - Page 306
Ram Disk Device, Operation Failed
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Table 7-3 Alphabetical printer messages (HP Color LaserJet 4610n and 4650 models) (continued) Message Description Action PQ TROUBLESHOOTING printer will return to the Ready state when the pages are printed. Printing... REGISTRATION PAGE The printer is generating the registration page. The printer will return to the SET REGISTRATION menu when the page is completed. Follow the instructions on the printed pages. Printing... RGB SAMPLES This message appears while the printer No action is necessary. RGB samples are generated. Printing... SUPPLIES STATUS The printer is generating a supplies status page. The printer will return to the Ready state when the page is completed. No action is necessary. Printing... USAGE PAGE The printer is generating a usage page page. The printer will return to the Ready state when the page is completed. No action is necessary. Processing duplex job Do not grab paper until job completes Paper temporarily comes into the output bin while printing a duplex job. Do not attempt to remove the pages until the job is complete. Do not grab paper when it comes into the output bin. The message will disappear when the job is finished. You can then remove pages from the bin. Processing. . . The printer is currently processing a job but is not yet picking sheets. When paper motion begins, this message will be replaced by a message that indicates which tray the job is being printed from. No action is necessary. Processing. . . copy of The printer is currently processing or printing collated copies. The message indicates that copy X of Y total copies is currently being processed. No action is necessary. Processing. . . from tray XX The printer is actively processing a job No action is necessary. from the designated tray. RAM DISK DEVICE FAILURE A device failure has occurred on the specified drive. Turn the printer off and then on to remove this message from the display. To clear press alternates with Ready RAM DISK FILE OPERATION FAILED To clear press The printer received a PJL file system command that attempted an illogical operation (for example, to download a file to a non-existent directory). 1 Printing can continue. 2 Turn the printer off and then on to remove the message from the control-panel display. 3 If the message reappears, a problem might exist with the software program. 290 Chapter 7 Troubleshooting ENWW