HP 4600 Service Manual - Page 318

Table 7-4 Numerical printer messages (HP Color LaserJet 4600 models) (continued) Message Description Action 22 EIO X BUFFER OVERFLOW To continue The printer EIO card in slot X has Press overflowed its I/O buffer during a busy state. to resume printing. NOTE A loss of data will occur. press 22 PARALLEL I/O BUFFER OVERFLOW For help press The printer parallel buffer has overflowed during a busy state. Press to resume printing. NOTE A loss of data will occur. alternates with 22 PARALLEL I/O BUFFER OVERFLOW To continue press 40 EIO X BAD TRANSMISSION To continue press A connection with the card in EIO slot X has been broken abnormally. 1 Press to resume printing. NOTE A loss of data will occur. 2 Check that all cables are connected to the EIO ports and that the EIO board is seated properly. 3 If possible, print to another network printer to verify the network is working properly. 41.3 UNEXPECTED SIZE IN TRAY XX For help press alternates with The media that is loaded is longer or shorter in the feed direction than the size that is configured for the tray. 1 If the incorrect size was selected, cancel the job or press for more information. 2 Press and instructions. to step through the LOAD TRAY XX: [TYPE] [SIZE] For help press 41.5 UNEXPECTED TYPE IN TRAY XX For help press The printer senses a different media type in 1 If the incorrect type was selected, the media path than the type that is configured in the tray. cancel the job or press for more information. 2 Press and instructions. to step through the 302 Chapter 7 Troubleshooting ENWW