HP 4600 Service Manual - Page 388

Table 7-42 Printing submenu (continued) Menu item Values WIDE A4 NO YES PRINT PS ERRORS OFF ON PRINT PDF ERRORS (HP Color LaserJet 4610n and 4650 models only) OFF ON PCL FORM LENGTH ORIENTATION FONT SOURCE FONT NUMBER FONT PITCH SYMBOL SET APPEND CR TO LF 372 Chapter 7 Troubleshooting Description DARK: The internal Courier font that is available on the HP LaserJet III series printers. Use this item to change the number of characters that can be printed on a single line of A4-size paper. NO: Up to 78 10-pitch characters can be printed on one line. YES: Up to 80 10-pitch characters can be printed on one line. Use this item to select whether to print PostScript (PS) error pages. OFF: PS error page never prints. ON: PS error page prints when PS errors occur. Use this item to select whether to print PDF error pages. OFF: PDF error page never prints. ON: PDF error page prints when PDF errors occur. Use this item to configure settings for the printer control language. FORM LENGTH: Use this item to set vertical spacing from 5 to 128 lines for the default paper size. ORIENTATION: Use this item to set the default page orientation to portrait or landscape. FONT SOURCE: Use this item to select the font source as Internal; CARD SLOT 1, 2, or 3; Internal disk, or EIO disk. FONT NUMBER: The printer assigns a number to each font and lists the numbers on the PCL font list. The range is 0 to 999. FONT PITCH: Use this item to select the font pitch. This item might not appear, depending on the font selected. The range is 0.44 to 99.99. SYMBOL SET: Use this item to select any one of several available symbol sets at the printer control panel. A symbol set is a unique grouping of all the characters in a font. PC-8 or PC-850 is recommended for line-draw characters. ENWW