HP 4600 Service Manual - Page 297
Detectable Size In Tray Xx, Eio Disk X
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Table 7-3 Alphabetical printer messages (HP Color LaserJet 4610n and 4650 models) (continued) Message Description Action alternates with DETECTABLE SIZE IN TRAY xx Recommend move switch to STANDARD DISK DEVICE FAILURE alternates with Ready For menus press A device failure has occurred on the specified drive. 1 Printing can continue for jobs that do not require access to the disk drive. 2 To clear the message, turn the printer off and then on. 3 If the message persists, remove and reinstall the EIO disk drive. 4 If the message persists, replace the EIO disk drive. DISK DEVICE OPERATION FAILED To clear press alternates with The printer received a PJL file system command that attempted an illogical operation (for example, to download a file to a non-existent directory). 1 Printing can continue. 2 Turn the printer off and then on. 3 If the message reappears, a problem might exist with the software program. Ready DISK FILE SYSTEM IS FULL alternates with To clear press Ready DISK IS WRITE PROTECTED To clear press alternates with The printer received a PJL file system command that attempted to store something on the file system. The attempt was unsuccessful because the file system is full. 1 Use the HP Web Jetadmin software to delete files from the EIO disk drive and then try again. 2 To remove this message from the control-panel display, turn the printer off and then on. The file system device is protected and 1 To enable writing to the disk, turn no new files can be written to it. off write protection, by using HP Web Jetadmin. 2 To remove this message from the control-panel display, turn the printer off and then on. Ready EIO DISK X Initializing EIO DISK X NOT FUNCTIONAL For help press The EIO disk device in slot X is initializing. The EIO disk device in slot X is not working correctly. No action is necessary. Remove the EIO disk from the indicated slot and it replace with a new EIO disk drive. ENWW Printer-error troubleshooting 281