HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 134
Connecting the fax accessory to a phone line, Faxing
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
10. Replace the formatter cover. 11. Reinstall the output bin, the 3-bin mailbox, or the stapler/stacker. Note 12. Reconnect all the cables, and turn on the MFP. Connecting the fax accessory to a phone line When connecting the fax accessory to a phone line, ensure that the phone line being used for the fax accessory is a dedicated line that is not used by any other devices. Also, this line should be an analog line because the fax will not function correctly if it is connected to some digital PBX systems. If you are not sure whether you have an analog or digital phone line, contact your telecom provider. HP recommends using the phone cord that comes with the fax accessory to ensure that the accessory functions correctly. Follow these instructions to connect the fax accessory to a phone jack. 1. Locate the phone cord that is included with the fax accessory kit. Connect one end of the phone cord into the fax accessory phone jack that is on the formatter. Push the connector until it clicks. CAUTION Be sure to connect the phone line to the fax accessory port , which is near the bottom of the formatter. Do not connect the phone line to the HP Jetdirect LAN port, which is nearer the top of the formatter. 2. Connect the other end of the phone cord into the phone jack on the wall. Push the connector until it clicks. 120 Chapter 6 Faxing ENWW