HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 59
Default Custom Paper, Unit Of Measure
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ENWW Item DEFAULT PAPER SIZE DEFAULT CUSTOM PAPER SIZE Values LETTER* LEGAL EXECUTIVE 8.5X13 A4 A5 B5(JIS) EXECUTIVE(JIS) DPOSTCARD(JIS) 16K ENVELOPE #10 ENVELOPE MONARCH ENVELOPE C5 ENVELOPE DL ENVELOPE B5 CUSTOM UNIT OF MEASURE X DIMENSION Y DIMENSION PAPER DESTINATION OUTPUT BIN 1* OUTPUT BIN 2 OUTPUT BIN 3 DUPLEX OFF* ON OVERRIDE A4/LETTER YES* NO Explanation Set the default image size for paper and envelopes. (The item name will change from PAPER to ENVELOPE as you scroll through the available sizes.) Allows you to set a custom paper size for any of the installed trays. Substitute the tray number for . Select the X and Y dimensions of the custom paper size. Select the output bin on the optional 3-bin mailbox. Note This item appears only if an optional 3-bin mailbox is installed, and if it is not configured for stacker mode. Set the value to ON to print on both sides (duplex) or OFF to print on one side (simplex) of a sheet of paper. For more information, see Printing on both sides of paper (optional duplexer). This command is used to print on Letter-size media when an A4 job is sent but no A4-size media is loaded in the MFP (or to print on A4-size media when a Letter job is sent, but no Letter-size media is loaded in the MFP). Configure device menu 45