HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 62
Print quality submenu, CON DEVICE, PRINT QUALITY
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Print quality submenu You can gain access to some of the items in this menu in either a software program, or in the printer driver (if the correct printer driver is installed). Printer driver settings and software program settings override control-panel settings. For more information, see Using features in the printer driver. To gain access to this menu, touch CONFIGURE DEVICE, and then touch PRINT QUALITY. Item SET REGISTRATION FUSER MODES Values PRINT TEST PAGE SOURCE ADJUST TRAY List of media types Explanation Shift the margin alignment to center the image on the page from top to bottom, and left to right. You can also align the image on the front, with the image printed on the back. Configure the fuser mode associated with each media type. The fuser mode can be changed only in this menu option at the control panel. NORMAL: Normal temperature; prints at full speed. HIGH1: Raises the temperature; prints at 3/4 speed. HIGH2: Raises the temperature; prints at 1/2 speed. LOW 1: Low temperature; prints at 3/4 speed; used for lightweight media. LOW 2: Low temperature; prints at full speed; used for transparencies. For a complete list of supported media types, see Supported types and sizes of print media. CAUTION If you change the fuser mode to HIGH1 or HIGH2, be sure to change it back to the default when you are done printing. Setting a paper type to HIGH1 or HIGH2 might shorten the life of some consumables, such as the fuser, and might cause other failures or jams. 48 Chapter 2 Using the control panel ENWW