HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 230
Understanding accessory lights for the 3‑bin mailbox and stapler/stacker, Accessory lights
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Understanding accessory lights for the 3-bin mailbox and stapler/ stacker The following table lists errors that can occur in the 3-bin mailbox or stapler/stacker and that are reported by the accessory lights and on the control-panel display. Accessory lights Light Solid green Solid amber Blinking amber Explanation and solution ● The accessory is receiving power and is ready. ● The stapler is low on staples. STAPLER LOW ON STAPLES appears on the control-panel display. Fewer than 20 staples remain in the staple cartridge. Replace the staple cartridge. See Loading staples. ● The number of pages in the job exceeds the 30-page limit for stapling. TOO MANY PAGES IN JOB TO STAPLE appears on the printer control-panel display. For jobs that have more than 30 pages, staple the pages manually. ● The accessory is experiencing a hardware malfunction. 66.XY.ZZ OUTPUT DEVICE FAILURE appears on the control-panel display. (See the section for this message in Understanding MFP messages.) ● The accessory has a staple jam. 13.JJ.NT JAM IN STAPLER appears on the control-panel display. (See the section for this message in Understanding MFP messages.) ● The accessory has a paper jam, or a sheet needs to be removed from the unit, even if the sheet is not jammed. 13.JJ.NT JAM IN OUTPUT BIN appears on the control-panel display. (See the section for this message in Understanding MFP messages.) ● The bin is full. STACKER BIN FULL appears on the control-panel display. (See the section for OUTPUT BIN FULL in Understanding MFP messages.) ● The stapler is out of staples. REPLACE STAPLE CARTRIDGE appears on the control-panel display. (See the section for this message in Understanding MFP messages.) ● The jam-access cover is open. OUTPUT PAPER PATH OPEN appears on the control-panel display. (See the section for this message in Understanding MFP messages.) ● The stapler unit is open. OUTPUT PAPER PATH OPEN appears on the control-panel display. Make sure the staplecartridge cover is completely closed. (See the section for this message in Understanding MFP messages.) ● The firmware is corrupt. CORRUPT FIRMWARE IN EXTERNAL ACCESSORY appears on the control-panel display. (See the section for this message in Understanding MFP messages.) 216 Chapter 10 Solving problems ENWW