HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 69
Copy/send settings, SYSTEM SETUP
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Item JAM RECOVERY LANGUAGE Values AUTO* ON OFF List of available languages Explanation Determine how the MFP functions when a jam occurs. AUTO: The MFP automatically selects the best mode for jam recovery (usually ON). This is the default setting. ON: The MFP automatically reprints pages after a jam is cleared. OFF: The MFP does not reprint pages following a jam. Printing performance might be increased with this setting. Sets the language of the control panel. Copy/send settings This table lists the options that are available for the COPY/SEND SETTINGS, which are part of the SYSTEM SETUP submenu. Values INACTIVITY TIMEOUT AUTO SETTINGS RESET TIMEOUT AFTER SEND HOLD OFF PRINT JOB HOLD OFF TIME SCAN AHEAD AUTO JOB INTERRUPT COPY JOB INTERRUPT Explanation Defines the amount of time until the copy settings return to the default settings after any control-panel activity is completed. Controls whether copy/send settings revert to default settings after the defined INACTIVITY TIMEOUT period. Defines the amount of time before the send settings return to the default settings after any control-panel activity is completed. Prevents network print jobs from starting within a specified period after a copy is completed. Defines the amount of time that print jobs must wait if HOLD OFF PRINT JOB is set to ON. Allows a copy job to be scanned even if the MFP is printing another job. The job will be scanned and held until it can be printed. If this setting is set to OFF, the job is not scanned until the print job is completed. Allows a copy job to automatically interrupt any currently printing network print job. The copy job is placed between full copies of the job that is currently printing. If this setting is set to OFF, the job is not printed until all copies of the print job are completed. Allows you to interrupt the current copy job to make a different copy. When you press the START button, the MFP shows a message that asks if you want to interrupt the current copy job. ENWW Configure device menu 55