HP LaserJet 4345 HP LaserJet 4345mfp - User Guide - Page 38
Loading trays 2
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
10. Adjust the media guides so they lightly touch the media stack, but do not bend the media. Note CAUTION Note 11. Make sure the media fits under the tabs on the guides and not above the load level indicators. If printing on long media also pull out the tray extension until it stops. 12. Touch EXIT to exit the menus. The tray is ready to use. Loading trays 2, 3, 4 and 5 Trays 2 , 3, 4, and 5 hold up to 500 sheets of standard media. For information about paper specifications, see Supported types and sizes of print media. The following are the detectable standard sizes, which are marked inside the tray: ● A4 ● Letter ● Legal ● Executive ● B5 (JIS) ● A5 The following are the undetectable standard sizes: ● 16K ● Executive (JIS) ● 8.5 x 13 (216 x 330 mm). When loading undectable sizes, you need to manually set the size at the control panel. For information about loading custom-size media, see Loading custom-size media in trays 2, 3, 4, and 5. To avoid a jam, never add or remove paper from a tray while printing from that tray. To load standard-size media in trays 2, 3, 4, and 5 Do not load envelopes in trays 2, 3, 4, or 5. Use only tray 1 for printing on envelopes. 24 Chapter 1 MFP basics ENWW