HP Workstation x2000 hp workstation x2000 - Technical Reference and Troublesho - Page 115

Tests and Error Messages Error Message Summary Code # 0000h 0010h 0011h 0012h 0020h 0040h 0041 0060h 0070h 0100h 0101h 0102h 0103h 0300h 0301h 0310h 0311h 0306h 0400h 0401h 0500h 0501h 0510h 0520h Cause/Symptom Short message (US) Any POST error that isn't listed below System error CMOS Checksum error (if no serial EEPROM) Incorrect CMOS Checksum Date and time (CMOS backed up from SE2P) Date and time lost PC configuration lost (both SE2P and CMOS lost) Incorrect PC configuration Any POST error regarding an AT option ROM Option ROM error Serial number corrupted (bad checksum or null #) Product flag not initialized or bad Invalid PC serial number Invalid internal product type RPO initialization failure Remote power on error CPU Termination Card missing from processor 2 socket in a mono-processor system CPU terminator card error Keyboard stuck key Keyboard error Keyboard self-test failure Keyboard error Keyboard controller I/O access failure Keyboard error Keyboard not connected Floppy A: self-test failure Keyboard error Flexible disk drive A error Floppy B: self-test failure Flexible disk drive B error Floppy A: not detected (but configured in CMOS) Flexible disk drive error Floppy B: not detected (but configured in CMOS) Flexible disk drive error General failure on floppy controller Flexible disk drive error CD-ROM test failure CD-ROM error CD-ROM not detected (but configured in CMOS) CD-ROM error General failure on HDD onboard primary ctrl IDE device error General failure on HDD onboard secondary ctrl HDD # 0 self-test error IDE device error IDE device # 0 error HDD # 0 not detected (but configured in CMOS) IDE device # 0 error Chapter 4 115