HP Workstation x2000 hp workstation x2000 - Technical Reference and Troublesho - Page 162
Mass Storage and Optical Device Overview
View all HP Workstation x2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Installing and Replacing Hardware Parts Mass Storage and Optical Device Overview Figure 6-7 Mass Storage and Optical Device Overview The Workstation has an integrated Ultra ATA-100 controller that supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access. In addition to the floppy disk drive, your Workstation can support another 3.5-inch device plus three front-access 5.25-inch devices. Note that one front-access shelf may already have a CD-ROM drive installed in it. You can physically install up to two hard disk drives in the x2000 chassis. The internal hard disk shelves support up to two 15 Krpm drives. Identifying Cables and Connectors (all models) If you add an IDE Zip drive, hard disk drive, DVD drive, CD-ROM drive, CD-RW drive, or tape drive, you need to connect it to power and data cables. The data cables and connectors provided are shown in Fig. 1-5. Data Cables and Connectors Secondary IDE cable for access devices such as CD-ROM Drives or Zip Drives Two IDE data cables each with two 40-pin connectors for IDE Drives Primary IDE cable supports two Hard Disk Drives Cable with one 34-pin connector for 3.5-inch Floppy Disk Drive Secondary IDE Connector Primary IDE Connector Floppy Disk Drive Connector 162 Chapter 6