HP Workstation x2000 hp workstation x2000 - Technical Reference and Troublesho - Page 196

Case 1 Case 2 Troubleshooting Your x2000 Workstation Symptom: when the power button is pressed, the Workstation... Shows no sign of activity at all: • Monitor is blank. • No hard disk drive or fan noise. • MaxiLife status panel does not light up. Appears to boot, but monitor remains blank: • Hard disk drive and fan can be heard. • Status LED is GREEN. • MaxiLife status panel displays system booting. Does not boot: • Monitor remains blank. • Status LED is RED. • Beep code emitted. • MaxiLife status panel displays an error message with a sad face . Starts to boot and there is activity on the monitor: • Boot process fails with an error message. • Status LED is RED. • MaxiLife status panel displays a sad face POST error message. and a Starts to boot and there is initially some activity on the monitor, but then: • Screen becomes blank, or • Image is corrupt. Type of problem Workstation may not be correctly connected to the power supply. Monitor may be badly connected or not switched on. HP MaxiLife has detected a hardware configuration error. A component may be improperly connected inside the Workstation. Configuration error has been detected by the POST (Power-On Self Test). Video card may be improperly installed or incorrectly configured. Hard disk drive failure or not accessible. Refer to page page 199 page 201 page 204 page 209 page 211 Case 3 Case 4 Case 5 196 Chapter 7