HP Workstation x2000 hp workstation x2000 - Technical Reference and Troublesho - Page 205
Pre-Boot Test Errors
View all HP Workstation x2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Troubleshooting Your x2000 Workstation Case 3: Boot Fails, Monitor is Blank, MaxiLife Displays Error Message Beep Code 1 beep 2 beeps The second type of sound is a series of long beeps that indicate a particular error. If you hear a series of beeps, you should count them as this will help you detect the cause of the problem. If your Workstation unable to display a POST error message (for example, when you graphics controller has failed), an error message is displayed on the MaxiLife LCD. Pre-Boot Test Errors The following table shows the type of error messages that can occur during the pre-boot checks. MaxiLife Message CPU Socket - Cause... Processor absent, not correctly connected or ZIP socket not closed Power supply is in protected mode Check that... • Check processor correctly connected and ZIP socket closed. • Processor socket 2 contains a terminator if it is unused. • Power cables inside the Workstation are correctly connected. Chapter 7 205