HP Workstation x2000 hp workstation x2000 - Technical Reference and Troublesho - Page 88
If You Forgot the Administrator Password
View all HP Workstation x2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
HP BIOS If You Forgot the Administrator Password If You Forgot the Administrator Password 1. Turn off the Workstation, disconnect the power cord and all cables, then remove the cover. 2. Set switch 9 on the system board switch block to ON. 3. Replace the power cord, and restart the Workstation. 4. When the Passwords have been cleared message appears, turn off the Workstation. 5. Remove the power cord, and reset switch 9 back to OFF. 6. Replace the Workstation's cover, turn on the Workstation, and let it complete its startup routine. 7. After POST completes, press F2 when prompted to use the Setup program. 8. Set the administrator and new user passwords. 9. To save the new password and exit Setup, press Esc or select Exit Menu. 88 Chapter 3
HP BIOS
If You Forgot the Administrator Password
Chapter 3
88
If You Forgot the Administrator Password
1.
Turn off the Workstation, disconnect the power cord and all cables,
then remove the cover.
2.
Set switch 9 on the system board switch block to
ON
.
3.
Replace the power cord, and restart the Workstation.
4.
When the
Passwords have been cleared
message appears, turn off
the Workstation.
5.
Remove the power cord, and reset switch
9
back to
OFF
.
6.
Replace the Workstation’s cover, turn on the Workstation, and let it
complete its startup routine.
7.
After POST completes, press
F2
when prompted to use the Setup
program.
8.
Set the administrator and new user passwords.
9.
To save the new password and exit Setup, press
Esc
or select
Exit Menu
.